

|
What to do in Winter?
Winterization Clean pool first and make sure that the air ring is fully inflated. 1. Purchase 2 plastic 1 1/2 inch plugs from your pool dealer. Place these in the ports when the pump is removed. 2. Remove skimmer assembly. 3. Remove fountain or anything attatched inside the bulkhead fittings. 4. Install plastic plugs with rubber O ring (these can be purchased at the pool dealer as well), hand tighten on inside of pool. 5. Remove Ladder. 6. Add appropriate winter chemicals. (consult local dealer as different regions vary greatly) 7. Cover pool with the Sofpool Security cover and tighten draw string. 8. Drain pump/filter assembly, remove filter, detatch motor and pump from the filter housing by unscrewing lock nut fitting between pump and filter units. Fill pool to original water level when finished. 9. Bring pump and filter parts indoors and store in dry area, preferably heated. Note, Partially draining water from pool is not recomended. |
Please email any questions or comments to